Skip To Content

Catalog

Blanked edge Welch Plugs are engineered to seal core holes in castings with plug sizes ranging from 3mm - 100mm.

  • Good for limited depth and lower-pressure applications.
  • Best used as cover or to retain liquid at low or no pressure.

 

Request Information
Unit of Measure
Items
WELCH PLUGS – BLANKED EDGE ENGLISH (HP)

0.81 Millimeter (mm) Thickness Aluminum Plain Finish DIN470 Metric Blanked Edge Welch Plug
WELCH PLUGS – BLANKED EDGE ENGLISH (HP)

0.81 Millimeter (mm) Thickness Brass Plain Finish DIN470 Metric Blanked Edge Welch Plug
WELCH PLUGS – BLANKED EDGE ENGLISH (HP)

0.81 Millimeter (mm) Thickness Cold Rolled Steel Plain Finish DIN470 Metric Blanked Edge Welch Plug
WELCH PLUGS – BLANKED EDGE ENGLISH (HP)

1 Millimeter (mm) Thickness Cold Rolled Steel Plain Finish DIN470 Metric Blanked Edge Welch Plug
WELCH PLUGS – BLANKED EDGE ENGLISH (HP)

0.81 Millimeter (mm) Thickness Cold Rolled Steel Mechanically Plated Zinc DIN470 Metric Blanked Edge Welch Plug
Description N/A

Blanked edge Welch Plugs are engineered to seal core holes in castings with plug sizes ranging from 3mm - 100mm.

  • Good for limited depth and lower-pressure applications.
  • Best used as cover or to retain liquid at low or no pressure.

 
Outside Diameter N/A 3 mm
Hole Diameter N/A 3.099 mm
Spherical Radius N/A 3 mm
Material Type N/A Aluminum N/A Brass N/A Cold Rolled Steel N/A Cold Rolled Steel N/A Cold Rolled Steel
Material Thickness N/A 0.81 mm N/A 0.81 mm N/A 0.81 mm N/A 1 mm N/A 0.81 mm
Finish N/A Plain Finish N/A Plain Finish N/A Plain Finish N/A Plain Finish N/A Mechanically Plated Zinc
Outside Diameter N/A 3.00 mm±0.05 mm
Hole Diameter N/A 3.099 mm
Spherical Radius N/A 3 mm
Material Type N/A Aluminum N/A Brass N/A Cold Rolled Steel N/A Cold Rolled Steel N/A Cold Rolled Steel
Temper N/A H14 temper N/A H02 temper (half hard) N/A No. 2 (half hard) - ASTM A109 N/A No. 2 (half hard) - ASTM A109 N/A No. 2 (half hard) - ASTM A109
Material Thickness N/A 0.81 mm±0.038 mm N/A 0.81 mm±0.038 mm N/A 0.81 mm±0.038 mm N/A 1.00 mm±0.038 mm N/A 0.81 mm±0.038 mm
Finish Type N/A Plain Finish N/A Plain Finish N/A Plain Finish N/A Plain Finish N/A Mechanical-plated zinc -ASTM B695 0.00015" minimum (30 salt spray hours)
Material Specification N/A ASTM B208 - 1100 N/A ASTM B36/B36M - C26000 N/A SAE J403 - 1008/1010 N/A SAE J403 - 1008/1010 N/A SAE J403 - 1008/1010
Inventory1 N/A
Production Lead Time N/A
  • 1 If your order is in inventory, the shipping lead time is one week or less, otherwise the production lead time applies.